How to make a mirror on a wooden partition

100% of 100%

Mirror, mirror on the wall. This is the fairest of them all. You can make this mirror in just a few simple steps. The shelves next to it keep your stuff handy and allow you to decorate the mirror.

Step 1: Saw a 25cm strip off the board, so you have a 160x100cm board and a 160x25cm strip.
Step 2: On the 25cm strip, mark off shelves for the mirror.
Step 3: Use the V groove on the planer to round off the side of the large board and the front and sides of the shelves.
Step 4: Mark off where the shelves will be placed on the large board (use a spirit level) and drill the holes.
Step tip
If you use 4mm screws, drill the holes with a 3mm drill bit.
Step 5: Insert the screws into the plank, leaving the top sticking out.
Step 6: Mark off where the screws will be on the shelves and drill the holes.
Step 7: Screw the shelves in place.
Step 8: Fix the mirror in place with the supplied clamps (or glue it down if that’s the type of mirror you have) and fill the shelves with nice stuff.